Hands Up: Tackling Glove Waste in the Lab
In a previous Greening the Bench post, What's in the Box? Tackling Packaging Waste from Lab Suppliers, we looked at the cardboard, foam and polystyrene that arrives with almost every delivery. This time, we're staying with waste but looking at something much closer to your hands.
Disposable gloves are probably the most visible waste stream in any lab. The bins fill with them every day, and because each glove is so small and so routine, it's easy to stop noticing. So let's take a proper look at where the waste comes from, and how to cut it without giving up any protection.
One thing before we start. Gloves are personal protective equipment, and nothing in this post is about wearing them less when you need them. Your risk assessments and local safety rules always come first.
Why Gloves Deserve a Closer Look
The numbers add up quickly. As an illustration, a lab of ten people each using ten pairs a day gets through 200 gloves daily, which is over 45,000 gloves across a working year. Every one of them has been manufactured, packaged, shipped, paid for, worn briefly, and then paid for again at disposal.
That second payment matters. Many labs put every glove into hazardous or clinical waste by default, which is typically far more expensive than general waste and far more carbon intensive. Fewer wasted gloves means lower purchasing costs, lower disposal costs and less carbon, all at once.
The Right Glove for the Task
A good deal of glove waste starts with the wrong glove. A glove that tears, fits badly or isn't suited to the chemical gets replaced early, and may not be protecting you properly in the first place.
🧤 Material
Check the manufacturer's chemical compatibility chart against what you actually handle. Thin nitrile suits most routine work, but some solvents pass through it quickly. The right material protects you better and lasts the task.
📏 Size
Stock the full size range. Gloves that are too small tear when you put them on, and gloves that are too large snag and slip. Both end up in the bin within minutes.
⚖️ Thickness
Thicker isn't automatically better, and thinner gloves use less material per pair. Match the thickness to the hazard and the dexterity you need, as set out in your risk assessment.
🔁 Reusable options
For tasks like washing up, handling cryogens or working with hot items, reusable gloves designed for the job are safer than disposables and replace hundreds of pairs over their life.
Fewer Changes, Same Protection
You should always change gloves when they are contaminated, torn or punctured, between tasks where cross-contamination is a risk, and whenever your protocol or risk assessment says so. None of that is up for negotiation.
The avoidable waste sits elsewhere, in the changes that add nothing to safety or to your science:
Plan the task - Gather your reagents, tubes and consumables before you glove up, so you aren't taking gloves off halfway through to fetch something.
Batch your gloved work - Group bench tasks together, and keep clean activities like writing up and computer work for afterwards, with gloves off and hands washed.
Dry your hands first - Gloves tear far more easily when pulled onto damp hands, so a few extra seconds after washing saves a pair.
Question the habit - If gloves are being worn for a clean, low-risk activity, check whether your risk assessment actually requires them. If it does, wear them. If it doesn't, you've found a saving.
There's a contamination benefit here too. Gloves worn to open doors, answer phones or type are one of the main ways contamination spreads around a building, so taking them off at the right moment is good practice as well as good economy.
Take-Back and Recycling Schemes
Reducing comes first, but recycling has a part to play for what's left. Nitrile gloves can't go into ordinary mixed recycling, but specialist schemes will take them. Kimberly-Clark Professional's RightCycle programme collects its own gloves from eligible labs, TerraCycle offers Zero Waste Boxes that accept gloves from any brand, and some suppliers and waste contractors run their own collections.
The important limit is contamination. These schemes only accept gloves that have not been in contact with chemical, biological or radioactive hazards. Anything contaminated must go through your hazardous waste route, every time. That means recycling works best in areas where glove use is clean, and it needs a clearly labelled, separate bin plus agreement from your safety and waste teams before you start.
Schemes often carry a cost, so compare it with what you currently pay for disposal. Where clean gloves are going into an expensive waste stream, segregating them properly can save money even before recycling is considered.
Action of the Week
Run a one-day glove count. Put a tally sheet by the glove boxes in one lab area and ask everyone to mark each pair they take, with a quick note of why they changed.
Sort the reasons - At the end of the day, split the tally into necessary changes (contamination, damage, protocol) and avoidable ones (torn on donning, wrong size, forgot something, habit).
Pick one fix - Choose the most common avoidable reason and tackle it, whether that's stocking another size or setting up before gloving.
Share the number - Tell the team how many pairs were used. A real figure from your own lab is the best conversation starter you'll get.
Conclusion: Small Item, Big Opportunity
Gloves are a small item used in huge numbers, which is exactly why small changes add up. Choose the right glove, cut out the changes that protect nobody, and recycle what you safely can. You'll spend less, send less to incineration, and keep the same protection you had before.
Frequently Asked Questions
Why are gloves such a big part of lab waste?
Disposable gloves are used by almost everyone in the lab, many times a day, and each pair is worn once. That makes them one of the highest-volume single-use items a lab buys, and because they are often binned as hazardous waste by default, they can also be one of the more expensive items to dispose of.
Can I reduce glove use without compromising safety?
Yes, as long as the reduction comes from removing gloves that were never doing a protective job. Always change gloves when they are contaminated, damaged or when your risk assessment says so. The savings come from choosing the right glove and size, planning work so you are not gloving up repeatedly for one task, and not wearing gloves for clean, low-risk activities where your risk assessment does not require them.
Can nitrile lab gloves be recycled?
Nitrile gloves that are not contaminated with hazardous material can be recycled through specialist take-back schemes, such as the Kimberly-Clark Professional RightCycle programme or TerraCycle Zero Waste Boxes, where these are available to you. They cannot go in ordinary mixed recycling, and gloves contaminated with chemical, biological or radioactive hazards must always follow your hazardous waste route.
How do I choose the right glove for a lab task?
Start from your risk assessment and the manufacturer's chemical compatibility data. Match the material and thickness to the hazard, pick the correct size so gloves do not tear or slip, and keep heavier or reusable gloves for the tasks that need them. A thin nitrile examination glove suits most routine work, but it is not the right answer for every solvent, temperature or task.


